Single-Crystal Growth of P2-Type Layered Oxides with Increased Exposure of {010} Planes for High-Performance Sodium-Ion Batteries
Le Zhang, Jieyou Huang, Miaoyan Song, Lu Chen, Wenwei Wu, Xuehang Wu
Abstract
An increase in the size of single-crystal particles can effectively reduce the interfacial side reactions of layered oxides for sodium-ion batteries at high voltages but may result in sluggish Na + transport. Herein, single-crystal Na 0.66 Ni 0.26 Zn 0.07 Mn 0.67 O 2 with increased proportions of {010} planes is synthesized by adding low-cost NaCl as the molten salt. With the assistance of a NaCl molten salt, the median diameter (D50) of single-crystal Na 0.66 Ni 0.26 Zn 0.07 Mn 0.67 O 2 increases to 10.46 μm relative to that of the comparison sample without NaCl (6.57 μm). Electrolyte decomposition on the surface of single-crystal Na 0.66 Ni 0.26 Zn 0.07 Mn 0.67 O 2 is considerably suppressed, owing to a decrease in the specific surface area. Moreover, the increased exposure of {010} planes is favorable for improving the Na + transport kinetics of single-crystal particles. Therefore, at 100 mA g –1, single-crystal Na 0.66 Ni 0.26 Zn 0.07 Mn 0.67 O 2 exhibits a high-capacity retention of 96.6% after 100 cycles, which is considerably greater than that of the comparison sample (86.8%). Moreover, the rate performance of single-crystal Na 0.66 Ni 0.26 Zn 0.07 Mn 0.67 O 2 (average discharge capacity of 81.2 mAh g –1 ) is superior to that of the comparison sample (average discharge capacity of 61.2 mAh g –1 ) at 2000 mA g –1 . This work provides a new approach for promoting the single-crystal growth of layered oxides for highly stable interfaces at high voltages without compromising Na + transport kinetics.