Chemical Composition and Flexural Strength Discrepancies Between Milled and Lithography‐Based Additively Manufactured Zirconia
Marta Revilla‐León, Nadin Al‐Haj Husain, Abdul Basir Barmak, Javier Pérez‐López, Ariel J. Raigrodski, Mutlu Özcan
Abstract
PURPOSE: To evaluate the chemical composition, flexural strength, and Weibull characteristics of milled and lithography-based additively manufactured (AM) zirconia. MATERIALS AND METHODS: monochrome) milled (M group) and 3Y-TZP zirconia (LithaCon 3Y 210) lithography-based AM (CeraFab System S65 Medical) (AM group) bar specimens (n = 20). The chemical composition of the specimens was determined by using energy dispersive X-ray (EDAX) elemental analysis in a scanning electron microscope. Flexural strength was measured in all specimens using 3-point bend test according to ISO/CD 6872.2 with a universal testing machine (Instron Model 8501). Two-parameter Weibull distribution values were calculated. The Shapiro-Wilk test revealed that the data were normally distributed (p < 0.05). Flexural strength values were analyzed using independent Student's t-test (α = 0.05). RESULTS: There were no major chemical composition differences observed between M and AM groups. The AM specimens (1518.9 ± 253.9 MPa) exhibited a significantly higher flexural strength mean value compared to the milled (980.5 ± 130.3 MPa) specimens (DF = 13, T-value = -5.97, p < 0.001). The Weibull distribution presented the highest shape for M specimens (11.49) compared to those of AM specimens (6.95). CONCLUSIONS: There was no significant difference in the chemical composition of milled and AM zirconia material tested. AM zirconia tested exhibited significantly higher flexural strength compared with the milled zirconia evaluated.