Influence of Nozzle Parameters on Spray Pattern and Droplet Characteristics for a Two‐Fluid Nozzle
K. Kramm, Maike Orth, Arne Teiwes, J. Kammerhofer, Vincent Meunier, Swantje Pietsch‐Braune, Stefan Heinrich
Abstract
Abstract In this study, a two‐fluid nozzle, as, e.g., used in fluidized‐bed or spray drying applications, is comprehensively characterized regarding the spray pattern and droplet size. To analyze the spray cone, the spray cone angle and the radial mass distribution of the nozzle were measured at varied liquid flow rate, spray air pressure, liquid insert bore diameter, and air cap position. Additionally, droplet size distributions were recorded at different spray settings. In general, the overall spray cone and single droplets are significantly influenced by the spray parameters, especially the spray air pressure, as well as the nozzle geometry.