Fatigue behaviour of re-entrant auxetic structures made of the aluminium alloy AA7075-T651
Branko Nečemer, Tomaž Vuherer, Srečko Glodež, Janez Kramberger
Abstract
An investigation of the fatigue behaviour of the re-entrant auxetic structures made of the aluminium alloy AA 7075-T651 is presented in this study. The analysed auxetic structures represent a new class of cellular structures that show anomalous deformation responses such as negative Poisson’s ratio. In the proposed work, the influence of the unit cell orientation on the crack path and fatigue life was studied using experimental and computational approaches. The Low Cycle Fatigue (LCF) tests were performed at load control with the load ratio 0.1 in tension. In the LCF tests five loading levels were selected, and at least two tests were performed at each loading level. The same loading conditions were then applied in the computational model in the framework of the ANSYS software package, where a nonlinear kinematic material model was applied to obtain the stress–strain relationship. The strain-life approach, with consideration of the Morrow mean stress correction, was then used to obtain the fatigue life of the analysed auxetic structures. The experimental and computational results showed that the unit cell’s orientation has a minor influence on the fatigue life of both analysed auxetic structures, but impact on the direction of the fatigue failure path significantly.