Autothermal hydrogen release from liquid organic hydrogen carrier systems
Fabian Siegert, Michael Gundermann, Lukas Maurer, Simon Hahn, Jonas D. Hofmann, Max Distel, Johannes Schühle, Karsten Müller, Moritz Wolf, Patrick Preuster, Franziska Auer, Michael Geißelbrecht, Peter Wasserscheid
Abstract
A typical feature that the LOHC technology shares with other types of chemical hydrogen storage is that the release of hydrogen from the carrier requires an input of heat. In many use cases where waste heat from external sources is not available (e.g. in heavy-duty mobility), this is seen as a major drawback. In this paper, we show that autothermal LOHC dehydrogenation offers a very attractive way to overcome this drawback. In detail, we demonstrate autothermal hydrogen release from dicyclohexylmethane using diphenylmethane oxidation to benzophenone as source of heat. The full storage cycle involves benzophenone hydrodeoxygenation to dicyclohexylmethane, dicyclohexylmethane dehydrogenation to diphenylmethane, and diphenylmethane oxidation to benzophenone. We studied both the individual reaction steps using pure feedstocks and the integral cycle in which the intermediates and by-products of each reaction remain in the system for the subsequent reaction step. Although no efforts have yet been made to develop special catalyst materials for this purpose, the results with the applied commercial hydrodeoxygenation (Pd/C), dehydrogenation (Pt on alumina) and partial oxidation (VO x /TiO 2 ) catalysts are already very promising. The storage cycle can be closed with high selectivity and with only minor total oxidation losses. The proposed concept of autothermal LOHC dehydrogenation offers the potential to increase the amount of useable hydrogen from a given amount of charged hydrogen carrier by up to 30%. • Autothermal dehydrogenation enables chemical hydrogen storage without external heat. • Dehydrogenation heat is provided through partial oxidation of the hydrogen carrier. • Regeneration takes place through hydrodeoxygenation at energy-rich locations. • Individual reaction steps and influencing parameters have been studied. • Full autothermal hydrogen storage cycle demonstrated for model system.