Early Warning for the Electrolyzer: Monitoring CO<sub>2</sub> Reduction via In‐Line Electrochemical Impedance Spectroscopy
Hugh Warkentin, Colin P. O’Brien, Sarah Holowka, Benjamin Maxwell, Mariam Awara, Mark Bouman, Ali Shayesteh Zeraati, Rachael Nicholas, Alexander H. Ip, Essam S. Elsahwi, Christine M. Gabardo, David Sinton
Abstract
Abstract The electrochemical CO 2 reduction reaction (CO 2 RR) to fuels and feedstocks presents an opportunity to decarbonize the chemical industry, and current electrolyzer performance levels approach commercial viability. However, stability remains below that required, in part because of the challenge of probing these electrolyzer systems in real time and the challenge of determining the root cause of failure. Failure can result from initial conditions (e. g., the over‐ or under‐compression of the electrolyzer), gradual degradation of components (e. g., cathode or anode catalysts), the accumulation of products or by‐products, or immediate changes such as the development of a hole in the membrane or a short circuit. Identifying and mitigating these assembly‐related, gradual, and immediate failure modes would increase both electrolyzer lifetime and economic viability of CO 2 RR. We demonstrate the continuous monitoring of CO 2 RR electrolyzers during operation via non‐disruptive, real‐time electrochemical impedance spectroscopy (EIS) analysis. Using this technique, we characterise common failure modes ‐ compression, salt formation, and membrane short circuits ‐ and identify electrochemical parameter signatures for each. We further propose a framework to identify, predict, and prevent failures in CO 2 RR electrolyzers. This framework allowed for the prediction of anode degradation ~11 hours before other indicators such as selectivity or voltage.