Effect of Device Configuration and Patient's Body Composition on the <scp>RF</scp> Heating and Nonsusceptibility Artifact of Deep Brain Stimulation Implants During <scp>MRI</scp> at 1.5T and 3T
Bhumi Bhusal, Bach T. Nguyen, Pia Sanpitak, Jasmine Vu, Behzad Elahi, Joshua M. Rosenow, Mark J. Nolt, Roberto López-Rosado, Julie G. Pilitsis, Marisa DiMarzio, Laleh Golestanirad
Abstract
BACKGROUND: Patients with deep brain stimulation (DBS) implants have limited access to MRI due to safety concerns associated with RF-induced heating. Currently, MRI in these patients is allowed in 1.5T horizontal bore scanners utilizing pulse sequences with reduced power. However, the use of 3T MRI in such patients is increasingly reported based on limited safety assessments. Here we present the results of comprehensive RF heating measurements for two commercially available DBS systems during MRI at 1.5T and 3T. PURPOSE: To assess the effect of imaging landmark, DBS lead configuration, and patient's body composition on RF heating of DBS leads during MRI at 1.5T and 3T. STUDY TYPE: Phantom and ex vivo study. POPULATION/SUBJECTS/PHANTOM/SPECIMEN/ANIMAL MODEL: Gel phantoms and cadaver brain. FIELD STRENGTH/SEQUENCE: -weighted turbo spin echo. ASSESSMENT: RF heating was measured at the tips of DBS leads implanted in brain-mimicking gel. Image artifact was assessed in a cadaver brain implanted with an isolated DBS lead. STATISTICAL TESTS: Descriptive. RESULTS: We observed substantial fluctuation in RF heating, mainly affected by phantom composition and DBS lead configuration, ranging from 0.14°C to 23.73°C at 1.5T, and from 0.10°C to 7.39°C at 3T. The presence of subcutaneous fat substantially altered RF heating at the electrode tips (3.06°C < ∆T < 19.05° C). Introducing concentric loops in the extracranial portion of the lead at the surgical burr hole reduced RF heating by up to 89% at 1.5T and up to 98% at 3T compared to worst-case heating scenarios. DATA CONCLUSION: Device configuration and patient's body composition substantially altered the RF heating of DBS leads during MRI. Interestingly, certain lead trajectories consistently reduced RF heating and image artifact. Level of Evidence 1 Technical Efficacy Stage 1 J. MAGN. RESON. IMAGING 2021;53:599-610.