A GaN Driver for a Bi-Directional Buck/Boost Converter With Three-Level V<sub>GS</sub> Protection and Optimal-Point Tracking Dead-Time Control
Di Luo, Yuan Gao, Philip K. T. Mok
Abstract
This paper presents a gate driver for a GaN-based half-bridge structure operating in a buck converter with input voltage >40 V or a boost converter with output voltage >30 V. Two 500 pF on-chip capacitors are utilized to construct three-level gate drivers, providing a near- <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$V_{{\text {DD}}}$ </tex-math></inline-formula> negative voltage for gate of the rectifier switch to eliminate the induced pulse on the gate from the high <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">dv</i> / <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">dt</i> slew rate of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$V_{\text {X}}$ </tex-math></inline-formula> when the main switch is turned on. The dead time controller tunes the delay of the gate signal of the rectifier switch by sensing the slope of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$V_{\text {X}}$ </tex-math></inline-formula> , thus the near-optimal zero-voltage switching can be achieved with deviation < 3 ns. The GaN driver is implemented with a 0.18- <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula> BCD process. The efficiencies can be improved by 8.33% and 6.87% at light load in a buck and a boost converter due to the dead-time control. The peak efficiencies of 20 V–12 V and 12 V–18 V conversions are 86.37% and 84.39%, respectively.