Fatigue strength of partial penetration butt welds of mild steel
Richard Schiller, Markus Oswald, Josef Neuhäusler, Klemens Rother, Imke Engelhardt
Abstract
Abstract This paper presents the influences of the irregularity “insufficient penetration welding” on the fatigue strength based on experimental and numerical investigations. For this purpose, the fatigue strength of partial penetration butt welds of mild steel (S355) with different non-welded gaps were subjected to fatigue loading. Three different planned gap dimensions ( h = 4, 6, 8 mm) at one-sided (Y-seam) and two-sided (DY-seam) partial penetration butt welds were analysed. The results were obtained on a small-scale test specimen with a steel plate thickness of t = 20 mm, without axial and angular misalignment. For the numerical effective notch stress approach, regression formula for efficient analysis of stress concentration factors was determined. The results show that butt joints which are not fully penetrated on one or both sides, and which were previously not permissible for welded joints subject to fatigue loading, can be evaluated in the future on the basis of these investigations.