Distributed Thermal Modeling for Power Devices and Modules With Equivalent Heat Flow Path Extraction
Xin Yang, Siwei Xu, Ke Heng, Xinlong Wu
Abstract
Dynamic temperature information at critical locations has been a critical indicator to safely use power devices and modules; however, most of the existing 3-D thermal modeling methods are time-consuming and complicated, which seriously limits their application in practical temperature distribution estimation. Assisted by finite-element method (FEM), the proposed distributed thermal model takes the cross-coupling effects into account among multiple heat sources. Based on the extracted equivalent heat flow paths from FEM steady-state thermal simulations, a novel method of extracting thermal resistance and thermal capacitance ( <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$RC$ </tex-math></inline-formula> ) is presented for yielding temperatures at critical positions. More importantly, FEM and experimental results successfully prove the effectiveness of our proposed distributed model in accurately simulating the temperature distribution information for different monitoring points on a single chip, as well as different chips in a power module. Compared with prior-art 3-D thermal modeling methods, the time cost to establish our model is considerably lowered as the transient temperature responses and thermal impedance matrix are no longer required. Meanwhile, reduction in the number of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$RC$ </tex-math></inline-formula> parameters simplifies the identification process, which further improves the practicability and generalization ability of the proposed distributed thermal model.