Bimodal grain structure, phase transformation, and mechanical properties of a Mg-Gd-Y-Zn-Zr alloy during hot extrusion
Mingyang Chen, Haolan Zhang, Liqing Wang, Kai Ma, Dongdong Zhang, Yunlong Li, Shouzheng Wei, Zhen Zhang, Zhanyong Zhao, Peikang Bai
Abstract
In this study, we investigated the evolution of grain structures and second phases of a Mg-9.5Gd-4Y–2Zn-0.3Zr alloy during two-stage deformation that took place in the metal during hot extrusion, as well as their effects on its mechanical properties. We found that the alloy exhibited a bimodal grain structure consisting of equiaxed dynamic recrystallized (DRXed) grains and elongated unDRXed grains. As the extrusion process progressed, DRX occurred on a large scale, resulting in an increase in the proportion of DRXed grains from 17.8% to 93.2%, and a reduction in average grain size from 80.3 μm to 9.41 μm. The grain orientation also underwent a transition from a single orientation of an extrusion direction (ED) parallel to <0001> (i.e. ED//<0001>) to mixed orientations of ED//<01–10> and ED//<0001>. The primary mechanism of dynamic recrystallization (DRX) during extrusion involved particle-stimulated nucleation (PSN) accompanied by both continuous and discontinuous DRX. The Mg-9.5Gd-4Y–2Zn-0.3Zr alloy mainly contained intergranular 18R-long period stacking order (LPSO) phases and intragranular 14H-LPSO. As the extrusion process progressed, 18R-LPSO changed from blocky to lamellar to accommodate deformation, and β-Mg 5 (Gd,Y) phase particles dynamically precipitated along DRXed grain boundaries. The 14H-LPSO phase was found to be primarily distributed within coarse unDRXed grains. As deformation via extrusion progressed, the quantity of 14H-LPSO gradually decreased. Ultimately, with the gradual dissolution of Mg 5 (Gd,Y), 14H-LPSO reprecipitated within the recrystallized grain boundaries. As the extrusion process progressed, both the yield strength (YS) and elongation (EL) increased from 132.6 MPa to 287.6 MPa and from 10.8% to 15.5%, respectively. This was mainly attributed to the significant reduction in grain size and second phase size.