Design and Fabrication of a Patch Antenna for 5G Wireless Communications from a Low-Permittivity LiAlSi<sub>2</sub>O<sub>6</sub>-Based Ceramic
Siyu Xiong, Xiaowei Zhu, Guobin Zhu, Deqin Chen, Hongbo Cui, Laijun Liu, Chunchun Li
Abstract
A microwave dielectric ceramic based on lithium aluminum silicate (LiAlSi 2 O 6 ) with ultralow permittivity was synthesized using the traditional solid-state reaction technique, and its dielectric characteristics at microwave frequencies are presented. The nominal LiAlSi 2 O 6 ceramic exhibited a relative permittivity of 3.95. To enhance the material properties, LiAlSi 2 O 6 - x wt % B 2 O 3 microwave dielectric ceramics were fabricated by incorporating a low-melting-point sintering aid (B 2 O 3 ), achieving a relative density exceeding 94%. The resultant ceramics exhibited a relative permittivity (ε r ) ranging from 3.95 to 4.42, a microwave quality factor ( Q × f ) between 24,720 and 28,990 GHz, and a resonant frequency temperature coefficient (τ f ) varying from −45.9 to −20.6 ppm/°C. Additionally, the introduction of B 2 O 3 broadened the sintering temperature window and effectively lowered the optimal sintering temperature from 1400 to 1200 °C. Furthermore, LiAlSi 2 O 6 ceramics demonstrated a near-zero coefficient of thermal expansion (CTE) of 1.44 ppm/°C, which is advantageous for applications requiring high thermal stability. Based on LiAlSi 2 O 6 -2.0 wt % B 2 O 3 ceramics with ε r = 4.42, Q × f = 28,990 GHz, and τ f = −20.6 ppm/°C, a microstrip patch antenna was designed and fabricated. Testing of the antenna revealed exceptional performance, including a center frequency of 4.98 GHz, a bandwidth of 280 MHz (−10 dB), and a total efficiency reaching up to 93.7%. These findings underscore the promising potential of this material in advanced microwave and wireless communication applications.