Effect of Microstructure and Crystallographic Texture on the Fracture Toughness Anisotropy of LPBF IN718
José David Pérez-Ruiz, Wilmer Velilla-Díaz, Mikel Abasolo, Gaizka Gómez Escudero, Luís Norberto López de Lacalle
Abstract
Fracture toughness anisotropy is a key concern in IN718 components produced by Laser Powder Bed Fusion (LPBF), due to their strong crystallographic texture and characteristic lamellar microstructure. In this study, the effect of grain orientation on fracture toughness was evaluated by testing two LPBF IN718 builds with the same laser scanning strategy (R0), but with two different orientations: vertical (R0-0) and 45° inclined (R0-45) relative to the build direction. The mechanical response was assessed through compact tension (CT) tests following ASTM E399 and ASTM E1820 standards. Results show that the R0-45 specimens exhibited a fracture toughness nearly 2.5 times higher than R0-0 specimens. Detailed microstructural analysis, supported by EBSD and SEM, reveals that the higher toughness in the R0-45 orientation is linked to a combination of smaller effective grain size along the crack path, higher levels of geometrically necessary dislocations (GND), and increased kernel average misorientation (KAM), which collectively enhance plastic accommodation and crack-tip shielding. These findings support and reinforce the established understanding of the relationship between microstructure and anisotropic fracture behavior in LPBF IN718, facilitating its practical application in the design and orientation of additively manufactured components.