Cutting performance and wear characteristics of Si <sub>3</sub> N <sub>4</sub> –SiC <sub>w</sub> –HfB <sub>2</sub> ceramic cutting tools in turning of ductile cast iron
Qian‐Kun Gu, Runping Liu, Zhiwei Chen, Si‐Chun Luo, Wei‐Ming Guo, Hua‐Tay Lin
Abstract
Abstract This research investigated the cutting performance of three different types of Si 3 N 4 ‐based ceramic tools (Si 3 N 4 , Si 3 N 4 –SiC w , and Si 3 N 4 –SiC w –HfB 2 ) with distinct mechanical properties during turning of ductile cast iron. Si 3 N 4 ceramic tool, characterized by high hardness and low toughness, showed minor micro‐chipping and the highest average flank wear rate during the initial wear stage, leading to a short cutting life of 1679 m. Si 3 N 4 –SiC w ceramic tool, with low hardness and high toughness, exhibited the highest average flank wear rate during the middle and final wear stages, resulting a short cutting life (1602 m). In contrast, the Si 3 N 4 –SiC w –HfB 2 ceramic tool, featuring high hardness and high toughness, demonstrated the lower average flank wear rate during all the wear stages, leading to a longest cutting life (2636 m). The results indicated that the average flank wear rate during the initial wear stage was mainly influenced by toughness, while during the middle and final wear stages, the average flank wear rate was primarily dependent on hardness.