Pulsed Eddy Current Sensor for Cascade Electrical Conductivity and Thickness Estimation in Nonferrous Metal Plates
Chun-Yeon Lin, Renyuan Huang, Megan Teng, Yi-Chin Wu
Abstract
This article presents a pulsed eddy current (PEC) sensor design for cascade electrical conductivity and thickness estimation in nonferrous metal plates. With a single excitation coil design, the combined change in magnetic flux density (MFD) caused by the excitation coil and the induced eddy current (EC) in the test plate is detected by a compact anisotropic magneto-resistive (AMR) sensor. The effects of the varying input pulsewidth are discussed with both numerical simulations in commercial finite element analysis (FEA) software and experimental results, and the time-domain characteristics of the responses are analyzed in relation to the properties of the test plates. It is revealed that the electrical conductivity can be gauged based on the peak value of the short pulse response, and with a known electrical conductivity value, plate thickness can be subsequently derived with the rise time of the long pulse response. A cascade estimation process is therefore proposed to calculate the parameters sequentially by adopting hybrid input signals with both short and long input pulses. Verified by the FEA results, this cascade estimation process was then experimentally validated with a prototype of the PEC sensor.