Litcius/Paper detail

Immobilization of poly(vinyl pyrrolidone) in Polysulfone Membranes by Radically-Initiated Crosslinking Using Potassium Persulfate

Dánae Gonzalez Ortiz, Morgan Nouxet, William Maréchal, Olivier Lorain, André Deratani, Céline Pochat‐Bohatier

2022Membranes11 citationsDOIOpen Access PDF

Abstract

Polysulfone (PSU) membranes with poly(vinyl pyrrolidone) (PVP) as a pore-forming and hydrophilic additive were prepared using the non-solvent-induced phase separation (NIPS) technique. PVP immobilization by radical-initiated crosslinking using potassium persulfate (KPS) was studied in view of obtaining membranes with high and long-lasting surface hydrophilicity. A method based on the ATR-FTIR technique was developed to discriminate crosslinked PVP from unreacted PVP in the membrane. The crosslinking progress was investigated as a function of temperature, KPS concentration, and reaction time. The results showed that temperature was the main factor influencing the crosslinking reaction since radical formation is temperature-dependent. Increasing the concentration of KPS and the reaction time led to an increase in the crosslinking rate. The effect of the degree of PVP crosslinking on the structure and properties of the prepared membranes was examined by studying mechanical properties, morphology by SEM, surface hydrophilicity by contact angle measurements, and water permeability.

Topics & Concepts

Potassium persulfatePolysulfoneMembraneContact angleChemical engineeringMaterials sciencePolymer chemistrySolventVinyl acetatePersulfateFourier transform infrared spectroscopyPhase inversionChemistryPolymerComposite materialOrganic chemistryCopolymerPolymerizationCatalysisBiochemistryEngineeringMembrane Separation TechnologiesFuel Cells and Related MaterialsAdvanced Sensor and Energy Harvesting Materials
Immobilization of poly(vinyl pyrrolidone) in Polysulfone Membranes by Radically-Initiated Crosslinking Using Potassium Persulfate | Litcius