Litcius/Paper detail

Design and Experimental Validation of a Noninvasive Glucose Monitoring System Using RF Antenna-Based Biosensor

Yaqub Mahnashi, Khurram Karim Qureshi, Abdullah A. Alshehri, Hussein Attia

2022IEEE Sensors Journal37 citationsDOI

Abstract

This article presents an end-to-end microwave-based system to detect the glucose level in aqueous solutions through a noninvasive scheme. A microwave signal is generated and transmitted through the sample under test (i.e., glucose–water solution). The received signal is then conditioned using a low-noise amplifier (LNA), a bandpass filter (BPF), and an RF detector. The change in the dc output voltage on the receiver side is used as a new way to detect the glucose level. The proposed glucose sensor is implemented using two RF microstrip patch antennas that resonate at 5.7 GHz and are fabricated using an FR-4 substrate. The design specifications of the sensing antennas are thoroughly studied and presented. The system is verified experimentally using glucose–water testing samples. The experimental results confirm the correlation between the glucose concentration and the dc output voltage for a concentration range of 0–5000 mg/dL. The effect of the transmitted power level on the system performance is also investigated. Finally, the proposed system is compared with the state-of-the-art systems reported in the literature.

Topics & Concepts

Radio frequencyBand-pass filterBiosensorDetectorElectronic engineeringMicrowaveMicrostripMaterials scienceSIGNAL (programming language)AmplifierAntenna (radio)Noise (video)Filter (signal processing)OptoelectronicsComputer scienceElectrical engineeringEngineeringTelecommunicationsImage (mathematics)Artificial intelligenceCMOSProgramming languageNanotechnologyMicrowave and Dielectric Measurement TechniquesWireless Body Area NetworksSpectroscopy Techniques in Biomedical and Chemical Research
Design and Experimental Validation of a Noninvasive Glucose Monitoring System Using RF Antenna-Based Biosensor | Litcius