Broadband mode-selective couplers based on tapered side-polished fibers
Kun Zhang, Pengjun Wu, Jiangli Dong, Dawei Du, Zuoxin Yang, Cheng Xu, Heyuan Guan, Huihui Lu, Wentao Qiu, Jianhui Yu, Zhe Chen
Abstract
We propose the broadband mode-selective coupler (MSC) formed with a side-polished six mode fiber (6MF) and a tapered side-polished small core single-mode fiber (SC-SMF) or an SMF. The MSCs are designed to allow the LP 01 mode in the SC-SMF and SMF to completely couple to the LP 01 , LP 11 , LP 21 , LP 02 , LP 31 , LP 12 modes in the 6MF over a broadband wavelength range. The phase-matching conditions of the MSCs are satisfied by tapering the SC-SMF and SMF to specific diameters. The tapered fibers are side-polished to designed residual fiber thickness using the wheel polishing technique. The effective indices of the side-polished fibers are measured with the prism coupling method. The MSCs provide high coupling ratio and high mode purity. High coupling efficiencies in excess of 81% for all the higher-order modes are obtained in the wavelength range 1530–1600 nm. For the LP 01 , LP 11 , LP 21 , LP 02 , LP 31 , LP 12 MSCs at 1550 nm, the coupling ratios are 96.2%, 99.8%, 89.5%, 85.0%, 90.9%, 96.1%, respectively, and the mode purity of the MSCs is higher than 88.0%. The loss of the MSCs is lower than 1.8 dB in the wavelength range 1530–1600 nm. This device can be applied in broadband mode-division multiplexing transmission systems.