Numerical investigation of sodium alginate-alumina/copper radiative hybrid nanofluid flow over a power law stretching/shrinking sheet with suction effect: A study of dual solutions
Zahir Shah, Adnan Asghar, Teh Yuan Ying, Liaquat Ali Lund, Ahmed Alshehri, Narcisa Vrînceanu
Abstract
The investigation into the flow of sodium alginate-alumina/copper hybrid nanofluids toward a power law form stretching/shrinking sheet while taking into account the effect of suction was carried out numerically. Sodium alginate-alumina/copper hybrid nanofluids have been of great interest in recent years due to their potential applications in various fields. Hybrid nanofluid is currently being used to enhance the efficiency of heat transmission rates. The primary objective of this research is to analyze the influence that certain characteristics, such as those pertaining to magnetic M, shrinking parameter ϵ, thermal radiation R, and thermal slip factor βT parameters, have on temperature and velocity profiles. Furthermore, as part of this investigation, the local skin friction as well as the Nusselt number according to the copper solid volume fraction ϕCu against shrinkage ϵ and suction γ effect were explored. In order to convert the nonlinear partial differential equation into a system of ordinary differential equations, appropriate similarity variables have to be incorporated into the transformation process. Ordinary differential equations are resolved with the help of the MATLAB bvp4c solver program, which is used in the conclusion phase. The study identified two approaches to shrinking ϵ sheet and suction γ zone with varying parameter values for copper volume fractions ϕCu. No solution was obtained in the range of when ϵ<ϵci, and γ<γci. In addition, the thermal boundary layer thickness was boosted as the intensity of the shrinking ϵ and thermal radiation R parameters intensified. The thickness of the thermal boundary layer decreased when the magnetic parameter M increased. When solid volume fraction of ϕCu augmented 1%–3% heat transfer rate intensified. As the amount of thermal slip factor βT increased in both solutions, the thickness of the thermal boundary surface decreased. Stability analysis has been completed, and the most stable solution has been identified.